Needle holder by hand at home - easy master classes for beginners and photo ideas

Lovers of needlework will appreciate such a necessary device as a needle holder. When working, it is important that everything necessary was always at hand.

Convenient and functional needle holder will help to perform any work faster and more comfortably. Even those housewives, for whom sewing is not their favorite activity, will appreciate a handy needle case.

In addition to saving money and time on searching for and purchasing a ready-made pincushion, you can decorate your desktop with a handy device.

Choosing the right size and shape of needlepoint can make your work much easier.

Materials for work

Sew needleboxes from fabric or felt, use cardboard or any hard surface as a base.

To fill the pincushion use holofiber, foam rubber, woolen yarn, felt, wool. It is better to use natural materials for the filler, since they do not make the needles rust when used for a long time.

Handmade needle holder

For those craftswomen who are constantly sewing, it is very convenient to have a needle holder always on hand. For this purpose, you can sew a handy pincushion, which is put on the hand or on the finger.

To sew a handy needle case that you can always have on hand is necessary:

• Cut out two circles with a diameter of 10 centimeters or more,
• Cut a strip of fabric 10 centimeters wide and 3-4 centimeters longer than the wrist circumference,
• Sew the circles together, leaving a small hole to fill the pincushion,
• Turn out the sewn circles and fill the needle with holofiber,
• Sew up the hole with a blind stitch,
• Divide the resulting shape with a needle with a thick thread into 8 parts, stitching the shape in the center and slightly pulling the thread,
• Sew from a strip of fabric folded in half a bracelet,
• On the ends of the strip sew a sticky tape,
• Sew the needlepoint to the bracelet.

Needle Ring

A handy needlepoint will turn out if you have a ring frame. The wider the base of the ring, the larger the needlepoint will be. For work you need to prepare a felt ball and glue gun. At the base of the ring glue the felt ball with a glue gun.

Needle holder in the form of fruits, berries, greens and vegetables

Funny and interesting needle holders can be made in the form of various fruits and vegetables.

Needlepoint pumpkin

For this product you will need orange colored fabric. You can use two different pieces of fabric.

• Cut out two identical circles from the fabric of different colors,
• Each circle is cut into four parts,
• Sew the parts into a circle, alternating pieces in staggered order,
• Circles are sewn together on the wrong side, leaving room to fill the needle,
• Turn out the blank and fill it with filler,
• Sew the hole with a blind stitch,
• With a needle with mouliné stitch through the pumpkin, dividing it into 8 parts,
• The center of the pumpkin is decorated with a green leaf, cut out of felt or fabric and brown braid as a twig.

Beautiful bright needlepoint in the form of a pumpkin, ready to use.

Needlepoint Tomato .

• Fold a rectangular piece of red fabric in half and sew the length and width of the rectangle.
• Turn out the blank and fill it with any filler you have.
• Tighten the hole with thread.
• Slightly flatten the blank, stitching it with thick green thread, decorating the tomato slices.
• On top, sew a green leaf and a twig made from felt or a piece of green fabric.

Needlepoint pineapple .

To work you will need yellow and green felt, yellow thread, beads, rice and filler.

• From the yellow felt, cut out a circle and a rectangular strip.
• Stitch the rectangular strip with thick yellow thread diagonally, forming pineapple cells.
• In the center of these cells sew beads.
• Bottom pineapple pull a little thread.
• Sew a rectangle.
• Sew the bottom to the cylinder obtained pineapple.
• Sprinkle a little rice or beans on the bottom, for the stability of the pineapple.
• Fill with stuffing and tie off the top with string.
• From pieces of green felt cut out the leaves of a pineapple and sew them to its top.

Needlepoint cactus .

To work, you need to cut out six identical parts in the form of a square with rounded ends at the top:

• Parts are sewn together two by two.
• The resulting three pieces are stacked, one on top of the other and stitched in the center.
• Fill the six compartments obtained cactus with filler.
• Sew up the bottom of the needle.
• Glue it with a glue gun in a pot, the proper size for the cactus.

Toys and pincushions .

You can make a pincushion in the form of an elephant, ladybug, butterfly, donut, hat, sewing machine and other toys.

Needlepoint elephant .

• Cut out two parts of the elephant from pink felt.
• Sew the parts together, leaving a hole to fill in where the tail will be.
• From a cord or thick thread to sew the tail.
• Fill the elephant with filler and sew up the hole with a blind stitch.
• From the ferrite cut two ears and sew them with floss or thick thread.
• Sew on the ears and eyes in the form of black beads.

Needlepoint hat .

To sew a beautiful needlepoint hat, you will need to prepare a circle cut out of thick cardboard and two circles of fabric for the hat.

The size of the large circle should be twice the size of the cardboard, the small circle a little larger than the size of the cardboard circle:

• Place a circle of cardboard on the center of the large circle and cover it with fabric.
• In a small circle of fabric placed filler and sew to form a ball.
• On the assembled fabric layer the resulting ball and sew it on.
• Stitch the band around the edge of the hat. You can glue the tape with a hot air gun.

Needle holders of improvised materials

Lovers of using improvised means can use for making needle holders, mugs, plastic bottles, cardboard sleeves, tin cans and more.

Needle holder from a jar

You will need a jar with a screw lid for the job. The top part of the lid should be cut out.

• From cardboard cut a circle equal in size to the lid.
• Circle of fabric slightly larger than the size of the cardboard circle.
• Put stuffing on the cardboard and cover with fabric.
• Thread the resulting ball through the hole in the lid.
• Glue the cardboard to the lid with a glue gun.
• Glue the edges of the fabric to the cardboard on the inside of the lid.

A handy needle jar is cooking. Inside it you can store small parts or thread.

Needle holder from a mug

A handy needle holder will turn out of a mug, as it will be very stable and voluminous.

For this purpose, a circle cut out of fabric is placed in the filler and stitched in the form of a ball.

The resulting ball is glued to the edges of the mug with hot-melt glue or a hot-air gun.

Needle holder from a plastic bottle

For the manufacture of such a needle holder, take a plastic bottle of 0.5 liters. It can be used in two ways:

1. Cut off the top of the bottle. Cut it into strips and bend them to the sides. From the strips we make petals of the flower. We paint the petals with white acrylic paint, and cover the middle with green paint. For the stability of the flower, take a metal screw cap and also cover it with green paint. Glue the neck of the bottle to the lid. In the center of the flower we put a needle ball. To do this, cut out a circle from yellow fabric or felt, in the center of which we place the filler. Sew the resulting ball at the bottom and glue it with a glue gun in the center of the flower.
2. A needle holder from the bottom of the bottle is made in the form of an armchair. From the sides of the bottle, cut out the back and arms of the chair. The back and handles can be decorated with fabric or paint, and glue a ball of fabric with a filler in the center of the chair. It turns out the original needle case.

Needle holder from a paper towel sleeve

Stiff cardboard sleeve will give stability to the needle case. To work from the sleeve cut out the desired shape.

In the center of the bobbin is placed a ball with a filler sewn from fabric. Glued it with a glue gun.

Needle holder of Kinder Surprise

The original needle holder will turn out of the case for Kinder Surprise toys. To do this, just take a few plastic halves and connect them to each other in the form of a flower, square, rhombus, circle.

You can connect them with glue or wire. In each half glue a small ball of needle or wool ball, you can use felt balls.

You can use an ordinary dish sponge as a needle, or a piece of Styrofoam decorated as a ball, cactus or other shape.

Any option you choose to make a needle holder with their own hands will be successful for work. After all, properly organized workspace contributes to a successful work.

The best photo ideas and schemes of homemade needle holders