Handcrafts on the theme of traffic: new ideas for making, easy master classes for kindergarten and school

The most effective way to transmit information to modern children recognized as a game. But after all, monotonous games can quickly get bored. Then diversify them with creativity. When making props, you can tell children about the traffic rules.

Contents:

Materials and tools for work

For handicrafts on the subject of traffic rules, any material will do. His choice depends on how old your child is and on his hobbies.

Ideas for making traffic lights

Traffic lights can be made from different materials. Each master is free to choose the most appropriate one.

From plasticine

Younger children are recommended for use dough for molding, and older children can already use plasticine, which should be a good kneading. In fact, it does not matter exactly what material will be made of traffic lights, the main thing - the maximum likeness with the real prototype. So, here we go:

Make a rectangular cube from black or dark blue plasticine.
For each side prepare small balls for bulbs: red, yellow, green.
Flatten the balls between your fingers.
Place the scones in their places.
For a stand, stick a cocktail straw into the product.
For the coaster, fill the lid with brown plasticine.
Stick the free end of the tube into the resulting stand.
If you want to make the work more difficult, make canopies for each signal.
You can learn the rules.

From cardboard.

Materials and tools:

corrugated cardboard;
colored paper;
A box cutter;
glue;
the sleeve from the toilet paper;
black paint;
duct tape.

Making process:

The traffic lights can be printed or you can draw on the bushing.
Divide the corrugated cardboard into 4 equal columns.
At 3 columns leave a length equal to the height of the hub, and the fourth leave an additional square for the bottom.
In each column cut round holes at the same height. A total of 12 windows.
Fold the workpiece, trimming the folds, if necessary.
Connect the joint with duct tape.
Bushing paint it black and let dry.
From colored paper cut squares: 2 yellow and one red and one green. Their side is determined by the diameter of the holes.
Glue the yellow squares in columns 1 and 3 in the middle.
In column 2, glue the red square on the lower level.
Place the green one in column 4 at the top level.
Turn the sleeve upside down.
Glue the handle of corrugated cardboard to the underside of the sleeve.
According to the size and shape of the top with a handle, cut out a piece of cardboard and glue.
The cardboard tube and box can easily be used to make a stand, but it is not necessary.

From paper.

Materials and tools:

colored paper;
gray cardboard;
self-sticker;
pencil;
glue.

Manufacturing Process:

On the back of the cardboard, draw three columns 7.5 centimeters wide.
Trim off everything beyond the edge lines.
In the middle column, draw 3 circles with a diameter of 5 centimeters and a distance between the centers of 6 centimeters.
Cut out circles along the contours.
Make bends inward along the dividing lines of the columns.
From colored paper of the main colors of the semaphore signals, cut rectangles with a height of 6 centimeters and a width of 7.5 centimeters.
Glue them on the right column inside out. They should be positioned each opposite their hole.
Check the accuracy by turning the blank.
Glue the left and right columns, so that the signals can be seen in the windows.
From cardboard cut a strip 7.5 cm wide and 2 times the height of the traffic light.
Insert it into the blank, aligning the top edges.
Circle the hole for the green element.
Remove the strip and cut a circle.
Return the movable part of the product.
Moving this strip you get a traffic light system.
Traffic light ready!

From a cardboard sleeve.

The supplies:

black cardboard;
colored paper;
glue;
the sleeve from the toilet paper.

Making process:

On the back of the black cardboard, mark the width of the sleeve.
Cut a strip from the sheet to that width.
Glue a strip of cardboard to the hub. Secure the edges well.
On the black cardboard, measure a rectangle 9 by 12 centimeters.
On red, yellow and green paper draw circles.
Cut out the drawn geometric shapes.
Place the circles on the front side of the rectangle.
The hub notch the edge in 2 places opposite each other.
Insert the rectangle with circles in the cuts.
The work is done.

From the box

It is not a problem to make a traffic controller from the "waste". For example, a cardboard box will do.

Necessary materials:

cardboard box;
glue;
colored paper.

Workflow:

Cover the box with paper of a background shade. Any except scarlet, yellow and green will do.
From the excluded shades cut identical circles.
Attach them to the box.
That's all, you can play.

From disks

Materials needed:

cardboard base;
office paper and colored paper;
colored pencils or felt-tip pens;
CDs;
glue gun;
PVA.

Workflow:

Cut out a rectangle from heavy cardboard. It should fit three CDs in a single line.
On a sheet of office paper draw a head with the face and attributes of a policeman.
On another ordinary sheet of paper depict the hands with police attributes.
If desired, you can repaint the cardboard for the base.
Fix the discs to the cardboard rectangle.
Cut out circles from red, yellow and green colored paper.
Glue the colored circles to the center of each CD. Follow the traffic light sequence.
It remains to glue the face and hands.

Handicrafts traffic rules

The importance of traffic rules must be conveyed to children. And so these topical crafts are very useful and relevant.

Drawing .

The simplest form of crafts is considered a drawing. And complicate it, you can create a wall newspaper with children. Any object placed on it should be dedicated to the main topic.

In the case of the rules of the road at work, you can depict signs describing the meaning, the rules when using different crossings, and so on.

But since this is not just a drawing, but a wall newspaper, there should be a large and memorable title.

Volumetric Paper Figures

Inventory needed:

A sheet of absorbent cotton;
gouache;
brushes;
pencil;
felt-tip pens;
tape measure;
glue;
corrugated cardboard;
wood blocks;
magnets;
templates of buildings.

Manufacturing Process:

Draw a diagram of the roadways and walkways on a large wattan.
Color the roads in black or dark gray.
Paint lawns and lawns green.
Paint walkways and sidewalks yellow.
Glue magnets to the diagram. The smaller ones for the signs and the larger ones for the buildings.
Cut out templates prepared in advance for the buildings.
Assemble all the volumetric structures. To do this, bend all the necessary lines and glue the joints of the parts.
For each building, cut out the bottom of the cardboard, using a sample house already assembled.
Glue magnets to the bottom of each building to match those on the diagram.
Prepare templates for traffic signs.
Cut them out.
Glue the signs to the matches, which will replace the posts.
From corrugated cardboard cut out circles.
Glue small magnets to one side of the circles, and on the other side stick the poles from the signs.
Traffic light can be made by any of the above master classes.
Place all the elements in their places on the diagram.
Allowance for the study of traffic rules with three-dimensional objects ready!

Paper applique

Gluing ready-made parts children have been doing since kindergarten. But there is a version for the more experienced - quilting. And it happens so that up to the end of the work it is not clear what the result will be. Such an approach encourages the guys to continue.

The necessary equipment:

white A3 paper;
double-sided colored paper;
paints with a brush;
glue;
markers.

Making Process:

On a white sheet of paper, draw a diagram of an area with a section of road and a crosswalk.
Cross the multi-colored sheets of paper into 0.7 millimeter wide strips.
Cut this paper into strips.
Make several strips of double width.
Start with the wider strips.
Cut the strip on one side all the way down the middle.
Take 1 narrow strip of each color and twist into a loose wheel. Secure the tip with glue.
Flatten the wheel on 1 of the sides to make a drop.
Dab all the drops on top of the glue and let dry.
Take 3 narrow red strips. Glue into one long strip.
Twist the strip into a tight wheel. Secure the end with glue.
As with the drops, dab the top with glue and let dry.
Repeat the same steps with the yellow and green ribbons. You will have signal lights.
For the flowers, twist a strip of any color into a tight ring. Brush with glue as in the previous cases.
Wrap the whole side of the incised strip around the core.
Fluff up the petal notches.
You will need 13 strips of the same color to make the bunny.
Take 3 narrow strips. Glue into one long strip.
Twist the strip into a tight wheel. Secure the end with glue.
Dab the top with glue and let dry. This is the head.
Connect the four strips together and twist an oval roll for the body.
Press in the middle of the body and smear it with glue. Dry it.
Ears and paws are made in the same way. Tape roll into a loose oval.
One side of the oval flatten between your fingers. Dab the top with glue and dry.
Glue all parts prepared panties together.
It remains to glue the rabbit, traffic lights and flowers on the base and you can play and develop.

Plasticine crafts

Figures of plasticine is not a surprise to anyone and in children they do not cause enthusiasm. Then it's time to remember the technique of plasticine drawing. Oddly enough, many children have not even heard of it. So, it's time to get started:

Print out black and white pictures of the traffic rules. It is desirable that there are no small details.
Glue the paper on cardboard.
After the glue dries, hide the entire construction under a layer of transparent adhesive tape.
Choose the element you will start with and choose the color of plasticine for it.
Well knead the plasticine in your hands.
Small portions "rub" plasticine on the element, the layer should not be translucent or very thick. Do not go beyond the lines.
Fill in all the details in this way.
After you finish working with any part carefully wipe your hands so the clay is not mixed.
This is how you get both the work with the plasticine and the picture.

Felt and crocheted figures

Equipment needed:

Blue, white, black, red, beige yarn;
crochet hook;
plastic bottle;
filler;
wire;
cardboard;
laminate sheet;
light green fabric;
toy eyes;
thread and needle;
glue;
paper clips.

Making:

Cut off the bottom of the bottle.
Cut a central part of it with the letters T.
Prepare 10 sts of blue yarn.
Ring the line.
Tie off the ring with 10 ssn.
Continue to knit ssn. gradually increasing in size, by knitting 2 ssn in one stitch of the previous row.
Remember to try on the bottle near the neck.
Knit until the bottle is cut.
Roll up the cut pieces of the bottle into round cylinders and staple together.
For the legs, gather at least 20 bp.
Close the chain in a ring and knit ssn up to the desired height of the pant leg. Remember to alternate blue and white yarn.
Join the pant leg to the torso with a hook, or with a needle and thread.
Also knit the second pant leg. Stripes should be symmetrical.
For the arm, start with 10 sts of blue yarn. Then knit as you did the pant leg to the desired length. Sew up the end.
Prepare 2 arms.
Pass the wire through the neck of the bottle and "legs". Form the feet.
Fill hands with filler and stitch to body.
For the head, start with 5 beige sts.
Knit in a circle with ssn.
First, increase the number of loops per circle, and when you reach the desired width, start reducing them.
This is done by knitting 1 ssn through 2 stitches.
You should have a beige ball.
Using the same pattern, knit a small ball for a nose.
Sew the nose to the head.
Tie two petals for the ears. The scheme is the same, just do not reduce the number of loops.
Using red yarn on the face sew a mouth.
From the blue yarn knit rim of about 15 centimeters in diameter.
Round piece of the same diameter cut out of cardboard.
Insert the cardboard into the knitted rim.
Continue knitting the blue ssn, gradually decreasing the diameter of the ring.
When you get the width of the head, change the yarn to red.
Knit 3 rows of ssn without changing the diameter.
For the visor, knit 15 sts in black yarn anywhere on the edge of the cap.
The next row 13 sts.
And the third row 11 sts.
Sew the cap to the head.
You can move on to the rod. Gather 4 bp in black yarn.
Tie 10 rounds of ssn. Alternate black and white yarn across the row.
Knit the desired length and sew the wand to the sleeve of the custodian of the law.
From the green material, cut out details for the vest according to the measures of the toy.
Sew the parts together.
Put the vest on the toy.
Glue the eyes on the face.
Fix the policeman in an upright position and the work is done.

Original materials for children's crafts on the rules of the road

When you have different materials on hand, you can use them to create creative crafts. After all, it will help to use them in a useful way.

Plastic bottles

From plastic bottles you can create some characters: a policeman, a live traffic light, a pedestrian and so on.

Let's try to make a road helper.

Coat the bottle with any paint.
Prepare the details of the face.
Glue the face elements in place.
Cut out different colored traffic lights and fix them in the right order.
Hands make from twigs, wire or other material and fix them to the handicraft.
Add any attribute to the hand.
That's it.

Thread

Thread is not only suitable for knitting or sewing. For example, you can make one pompom of red, yellow and green. Glue them to a skewer in the right order and you get a great traffic light.

From the remnants of colored thread you can make an applique - a scheme of the city.

Street model of improvised materials

Large models, as well as small crafts can be made of any improvised materials. Here are some ideas for creating objects for such a layout:

For buildings, glue boxes of different sizes with colored paper. Glue the windows and door to them.
You can use wattman or the lid of a large cardboard box as the base of the model. On the base, draw a diagram of the settlement with roads.
The traffic signs are cut out of cardboard and attached to toothpicks.
For the model traffic lights, you can make a cardboard rectangle with the signal lights drawn with markers. The easiest thing to do, too, is to fasten it to a toothpick.
The role of electric poles are twigs, and wire stretched between them. To the traffic lights also need to pull through electricity.
Vegetation is made by any convenient method from plasticine, to weaving figures of beads.
Cars can be taken from a set of models, or make them too, for example, from matchboxes and buttons.

The advantages of such layouts are that they can be constantly supplemented, or changed at will and the need to learn additional rules.

Studying traffic rules for children is vital, and in the form of a game is also interesting. Create with children and help him learn the world. You have a creative success!

Photo crafts on the topic of traffic

Share with friends:

Add a comment