How to sew a skirt with a zipper top by patterns: step by step instructions with schemes for beginners.

Skirt with a zipper top is relevant at any time. Nowadays, it is appropriate to wear a skirt with a zipper top not only on the beach, but also on a dinner-party. The only difference is the choice of fabric and decoration of the product. You can combine such a skirt from bikinis, ending with a blouse with ruffles.

You think that the skirt with a zipper top is difficult to sew? Not at all. Cope with her sewing can beginner seamstress. The main thing is to choose the right style. The skirt can be any length, straight or semi-sunny, with rounded edges, with ruched trim and so on.

Rules of fabric selection

You can choose practically any fabric for a skirt with a zipper top: from thin flying to dense wool fabrics. Thin fabrics are good for a semi-circle skirt, the fabric will lay in beautiful waves. Skirts of this style made of dense fabrics will look worse.

For a straight skirt with a zipper (if it is not a beach version) it is better to choose costume fabrics that hold the shape well.

If a ruffle or a flounce on the edge of the item is planned, it is better to give preference to dress materials, not very thin, but not dense either.

Good look summer skirts with a zipper, trimmed with a flounce of polka dots fabric. Ladies with large shapes with polka dots print should be careful not to look very voluminous.

Beginner seamstresses can be advised to use for sewing such models viscose with a large print, so that possible sewing defects are not noticeable.

Pattern for a skirt with a zipper top

The pattern of a skirt with a zipper is unusually easy to construct. It is built on the basis of the basic pattern of a straight model. Skirt with zafta consists of 3 main parts: 1 back panel and 2 front panels. The two front panel overlaps one another. Thus formed the smell.

The basic pattern of the skirt should make changes:

1. First lower the waist line. To do this, measure 3 cm down from the top cut of the skirt, draw a line and cut off. Undercutting should be done on the patterns of the front and back leaf.
2. Next you need to adjust the length of the product. Measure from the new waist line the desired length, draw a line.
3. Adjusting the front of the skirt. The pattern for half of the skirt's front must be enlarged on the flap. The width of the pant should be large enough so that the skirt does not have to be held when moving, protecting it from being too wide open. How to calculate the width of the pant? A width equal to at least 1/8th of the hip circumference is considered sufficient. For example, with a hip circumference of 100 cm, the width of the smell will be 12.5 cm. 100:8=12,5. From the midline of the front to measure 12.5 cm in several places and connect them. You get the pattern of half of the skirt front. The remaining part of the pattern can be cut. You will need to cut 2 such parts.

Sew a skirt with a zipper: schemes for beginners

Beginning masters it is better to abandon the idea of using too complicated schemes. It is necessary to start with simple ones. But this does not mean that sewing a beautiful skirt will not work. Quite the contrary, the result is sure to please.

Easy summer skirt

The most simple skirt with a zipper top can be sewn for summer, taking no more than an hour. For such a skirt will need a light fabric with a pattern (chiffon, crepe-chiffon).

For sewing you will need:

• fabric, a width of 140 cm, length equal to the length of the skirt + 10 cm at the waist + 2 cm for processing the edge and seam allowance;
• thread in the color of the fabric;
• sewing machine;
• scissors;
• tailor's chalk.

Sewing algorithm:

• Cut 10 cm from the fabric for the waistband. The 2 sides with edges are the sides of the skirt. Edges can be cut and processed along with the bottom of the skirt on the machine, bending the edge.
• A belt should be sewn to the raw side of the skirt. Darts must be sewn in first. Try on the future skirt. Based on how the fabric hugs your waist and hips you will see if darts are necessary.
• The excess fabric around the waist should be put in 2 darts.
• Use pins to put darts on the fabric.
• Lay out the fabric on the table, adjust the darts so that they are the same, mark the dart lines on the fabric, along which to stitch.
• Stitch on the machine.
• Iron the darts.
• Sew the waistband detail to the skirt, aligning the lines of the middle of the skirt and the waistband.
• Sew the tied parts of the waistband together and turn them out. Sew the unattached edge of the waistband to the skirt. Skirt ready.

Beach skirt

Girls with slim figures will look good with a short beach skirt of light fabrics.

The basis of such a skirt is a kerchief, two bottom sides of which are sewn one or two flounces of different width.

The length of the strip under each flounce is equal to the sum of two sides of the kerchief multiplied by 1.5. The width of the flounce must be at least 15 cm.

Long skirt

A long skirt with a zipper is sewed on the same principle as the summer beach skirt, but the fabric should be suit or denim.

Along the line of the zipper you can provide the trimming: embroidery, decorative buttons or other decorative fastener.

The belt in this model will not be fixed with ties, and fastened with a button. Ties need not be cut out. The belt must be reinforced with adhesive fleece.

Half-flannel skirt with a zipper top

For sewing a half-flannel skirt with a zipper top you do not need a pattern. Construction of the skirt is made directly on the fabric.

The amount of fabric depends on the length of the skirt. A half-flannel skirt requires at least 2 meters of fabric + 10 cm for the waistband.

Important: Before cutting, the fabric must be washed or steamed with an iron to shrink it.

For sewing you will need:

• fabric,
• scissors, a large ruler or tape measure,
• tailor's chalk,
• pins,
• thread to match the fabric,
• sewing machine.

To sew a skirt, follow these steps:

• Cut at once a strip of fabric 10 cm wide for the belt. Fold the rest of the fabric in half across, combining the edges. Lay out the material on the floor or table. In a few places, staple the layers with pins.
• Now you need to draw a circle around the waistline. Add 30-40 cm to the waist circumference for smell.
• Now you need to calculate the diameter of the semi-circle to mark the waist line on the fabric. Use the formula R=P/(2π), where P is the waist circumference + the width of the stock. π=3,14. If the waist width is 70 cm and the width of the smell is 30 cm, the calculation will be as follows. 70+30=100; R=100/2*3,14=15,9.
• Now you need to make some chalk marks on the fabric, postponing from the top corner with a crease of 15.9 cm. Put one end of the ruler at the corner of the fabric, where the fold is, and the other moving around, put a few marks on the fabric, moving to the other edge of the fabric.
• Connect the marks. From the resulting line measure down the length of the skirt. Outer edges can be rounded slightly. If left as is, the skirt will be straight.
• Cut the skirt. If everything is done correctly, you get a semicircle.
• The edges of the skirt can be left with an edge, or you can do it with a machine. To do this, cut the edge, twist the edge twice and stitch on the machine.
• The next step is to sew the belt. Place the waistband on the skirt at the waist with the sides facing each other, aligning the marks of the middle of the waistband and the middle of the skirt. Staple the pins.
• Sweep along the waist line with threads. Sew the waistband on the machine.
• Next, sew the loose ends of the waistband and turn out. Sew the waistband to the skirt along the waistline. Finish the bottom of the skirt with a roller stitch. Remain to iron the skirt and you can wear it.

Trapeze skirt with zipper top

To build a pattern for a trapeze skirt with a zipper top we take the basic pattern of a straight skirt. After the pattern is added to the skirt pattern, the sides of the pattern must be expanded to the bottom.

Do it on the pattern of the back, and the front leaf. To do this, from the intersection of the bottom line and the side to measure 5-6 cm. From the hip line to this point to draw a straight line. From the bottom of this line to measure up 1-1.5 cm. Connect that point and the bottom of the skirt with a smooth line.

A trapeze skirt will look good in suit fabric, denim, suede and leather. As a fastener you can use not only ties, but also a decorative zipper or make a number of large beautiful buttons.

Cut out all the details of the skirt from the fabric. Cut the belt. If your skirt will be fixed with elastic ties, its length must be two waist circumference + at least 30 cm. The width of the waist piece is 10 cm. Stitch up the darts and overlap them from the center to the sides.

Sew the side seams and trim the edges with an overlock or a zigzag stitch. Trim the edges of the skirt and hem the bottom. If the skirt is leather or suede, the sides and bottom can be treated with a special stitching. Remains to sew the belt, as already described above.

Skirt with an elastic band

For a skirt with an elastic band with a flounce will require a little more time than for sewing the most simple skirt with a valance. But the result will be worth it. At the waist will be sewn kuliska, in which will be inserted an elastic band.

This skirt is made of chiffon and lined. The bottom corners of the overlap are rounded at the front and a flounce is sewn all around the bottom edge of the skirt.

To sew a skirt for size 44-48 will need:

• chiffon - 1.2 m, a width of 145 cm,
• for lining viscose - 0.6 m, the width of the fabric 145 cm,
• Rubber band, a width of 3 cm - 0.8 m,
• scissors,
• Thread in the color of the fabric,
• sewing machine,
• fine needle for a sewing machine,
• pins,
• tape measure or a large ruler,
• tailor's chalk.

How to make a pattern? The finished length of the skirt at the back is 55 cm. The back of the skirt is a rectangle whose upper and lower sides are equal to half the circumference of the hips + 4 cm. The sides are equal to 55 cm:

• For the basis of the pattern of the front panel take half of the pattern of the back panel, to it you need to add an odor width of 30 cm. Now you need to draw a smooth line diagonally from the bottom point of the hemline to the upper outer point of the overlap.
• Cut out all parts of the product from the main fabric and the wrong side with seam allowance of 1 cm. From the main fabric, cut out a ruffle, the length of which is equal to two lengths of the bottom of the skirt and 13 cm wide, and a belt, the length of which is equal to the circumference of the hips + 2 flaps.
• Sew in pairs with needles from the main fabric and lining. Sew the side seams of the product and process with an overlock or a zigzag stitch. In the same way, sew 1 large and 2 small sides of the ruffle. Along the raw side, sew a machine stitch with the widest possible pitch.
• Assemble the ruffle to the thread by pulling 1 thread from the stitching on one side. Tie knots on both sides of the ruffle. Fold the ruffle and the bottom edge of the product facing each other and sew. Process the cut on the overlock or "zigzag".
• Overlap each other at the waistline, fix with a stitching or pins. Sew the waistband to the top of the garment, leaving an unstitched space for inserting an elastic band. Stitch in the center of the waistband and thread the elastic band into the bottom of the waistband. Thread an elastic band. All done!

Skirt with a zipper is now at the peak of popularity and is suitable for any figure. Such a skirt not only gives the whole appearance of femininity, even in maxi length, it looks very attractive. As you have seen sew a skirt with a zipper top is not difficult.

Photo ideas of homemade skirt with a zipper top