How to shorten men's and women's jeans at home: step by step instructions and subtleties of measurement

Sometimes it is not easy to buy clothes online, because often the size grid in one store may be radically different from the dimensional grid in another. Such a problem is actual when ordering trouser products, the selection of which requires a really good fitting.

If you "get in size" and get a thing that sits on you perfectly, it's already a big plus.

However, not everyone is so lucky. For example, many people do not wear their new clothes just because the length of their pants is too long, and the services of the master exceed the cost of the product itself.

But this is no reason to despair. In our article you will learn how to shorten trousers/jeans to the correct length, preserving the factory seam and without disturbing the cut.

Choosing the size of jeans / pants

In order to choose the right pant product, you need to know exactly your size. Use the formula below and calculate your measurements, seam length and size. The main elements of the formula are written in Latin letters.

W - fullness, volume at the waist. Used when referring to the waist circumference, i.e. the natural waistline. Take a tape measure and measure your waist circumference just above your belly button. Remember not to retract your abdomen during the measurement. Write down the results.

L is the length (the leg seam). The inside inseam measurement is determined by the inside of the thigh from the bottom of the pant leg to the inseam under the fly.

If you buy jeans/breakers from American sites, always take into account the differences in units of measurement. The size of American jeans is stated in inches. 1 inch equals 2.54 cm.

Let's take 38W x 34L as an example.

By multiplying the data we get the following:

• waist circumference 2.54 x 38 = 96.5 cm
• the step inseam is 2.54 x 4 = 86.3 cm.

The number obtained by dividing these results by 2.54 will be your size.

If you don't want to go through a long measuring procedure, you can find out your size another way. In that case, we will refer to the Russian size chart.

Subtract 16 from your usual size to find the waist circumference (W). For example, 46 - 16 =30W.

The length of the step inseam depends on the height. The height of 170-185 cm corresponds to the size 32L. If you are shorter, you will fit in 30L pants/jeans and if you are taller in 34L.

Alas, sometimes even after getting this information and doing all the calculations, you can get pants whose length does not correspond to your height. And what to do in this situation? The main thing - do not get upset. You can easily shorten the pants at home, if you read our article to the end.

Rules for measuring

Stand up straight in front of the mirror. Turn up the pant leg on the right leg so that the bottom edge touches the floor and touches your heel.

The higher the heel of the shoes you are used to wearing your pants/jeans with, the longer the pant leg should be.

Tuck the pants in and form a hem line.

Highlight the line with chalk or a piece of soap and then secure with pins.

Preparing the jeans

Lay out the pants on the work table (floor) and draw a line on both sides without beveling, perpendicular to the vertical seam, according to the points outlined:

• Mark from the main lines 3 cm - this is the seam allowance for thin fabric, 4 cm - seam allowance for thick winter pants.
• Next you need to transfer the measurements to the left half. Fold both pant legs over the back of the pants so that all side lines and seams match each other.
• Transfer the line to the left pant leg, referring to the right side or to the length of the step seam. Cut off excess fabric with tailor's scissors.
• Mark halfway down the pant leg to the baseline with a dotted line. Fold up the pant legs to the main line in a circle, and steam-sew.
• Then divide the bottom half from the main line in half, twist and iron.
• Once you've ironed out the double fold once more, get to work on the machine or hemming by hand.

Machine/hand sewing

Sweep the hems with a houndstooth stitch in a contrasting color.

Turn the jeans inside out and stitch with the same colored thread as the factory. The fabric is rough at the seams, so tap the seams with a hammer or the rings of your scissors.

Try to do the stitching carefully and take your time, gradually guiding the fabric.

The Quick Way

For this method, you will need adhesive tape. Secure (join) the tape to the inside of the hem and the main pant in the front and back in the center in two places. Turn the jeans inside out and stitch straight up and down along the side seams only.

Keeping the Fabric Seam.

This option allows you to shorten your jeans by keeping the factory seam:

• First, calculate the final length of your jeans and draw a line with chalk or a piece of soap. Add 1.5 cm for seam allowances and mark them with a dotted line.
• Cut the fabric with tailor's scissors along the dotted line.
• Step back 1.5 cm from the edge of the fabric seam, cut off the pant part, mark with a dotted line and cut off.
• Sew the two pieces together from the wrong side so that the main length line and the factory seam are the same, and then sweep and stitch.
• Use a sewing machine or overcasting stitch by hand to trim the selvedge.

Designing.

If you're not satisfied with the classic design of your jeans, you can turn them into a more unique piece. Make asymmetrical length, add decorative elements or applique, combine different shades of denim material with each other.

Jeans: types and description

Now let's consider what models of cropped jeans are presented in stores, as well as highlight their main features.

Note that the length of the pants depends on the model of jeans.

Women's jeans

1. Cropped jeans - don't forget that even cropped jeans have the right length. The main criterion is the ratio of length 7/8 from the classic models. What does 7/8 mean? The designation 7/8 is used for pants just above the ankles (2-3 cm depending on height). To calculate the length (D) just for your measurements, divide the length of the classic pants by 8 and multiply by 7. Calculation formula: D/8 x 7
2. Skinny jeans - the skinny fit not only accentuates the curves of your body, it also shapes it. Remember these nuances before you buy and choose responsibly.
3. Straight cut - as a rule, the classic women's jeans cover half of the heel. If you wear flat-soled shoes, there should be a small crease at the junction of your pants and shoes. Standard cut jeans with a medium accent on the waist, balance the image and fit many.
4. Jeans clashed culottes - the popularity of these models increased in the 70's of the last century and remains relevant to this day. The length of these jeans reaches to the lower shin line, and the waist line is inflated, which allows you to visually elongate any figure.
5. Wide jeans - loose cropped boyfriend jeans are popular for a long time. Suitable for any type of figure.
6. Ripped jeans - jeans with factory "holes" around the perimeter or in a chaotic order are ideal for walks and informal meetings.

The basic rule for wearing cropped pants is that the length of the pants should always be above the shoe line.

Men's jeans

1. Straight cut - straight cut jeans should cover the top of the shoes and the edge near the foot, the presence of creases in the front. Simpler - pant length to mid-back. The height from the sole of the shoe does not exceed 1-1,5 cm.
2. Medium length - if you wear medium length pants, the bottom of your pants should not touch the top of the shoes and form a fold. It is believed that this model of trousers should be combined exclusively with expensive shoes.
3. Shortened - jeans with ankle length are suitable for outdoor activities. The distance from the edge of the pants to the shoes should not be more than 2-3 cm.

What to wear jeans with

A successful image is made up of the right combination of individual components. We propose to get acquainted with the basic criteria of closet selection.

• Wear a voluminous sweater with straight cut jeans.
• Choose elongated blouses with skinny jeans.
• Accentuate the slimness of the legs, giving preference to a shorter model.
• Become higher or lower with the right length of the jeans.
• Variety the image with subtle pumps or high-heeled shoes.
• In the cold season, stop at the boots, but do not forget about the health and safety on the slippery road.

Now you can not only shorten your favorite jeans to the right length, but also correctly determine the size of the pants. A proportionally matched closet will allow you to always look stylish and neat.

Photo of cropped jeans