How to make a casket with his own hands on simple drawings for beginners: step by step master classes from wood, paper, plywood

Beautiful and bright casket is an indispensable helper for every child, teenager or adult woman. In the original box you can store bijouterie, a personal diary, favorite souvenirs given as a keepsake.

In modern stores, every customer will undoubtedly find a huge assortment of caskets of all sizes and shapes. However, a bright accessory can always be made with your own hands, using your own skills, dexterity and a set of improvised materials.

Blueprints for the box making

The first and most responsible stage of any craftsman's work is to prepare a drawing. The scheme of the future casket can be found in a ready-made form or you can make an outline on a sheet of paper. On the drawing it is necessary to note the following points:

1. The dimensions of the accessory itself, including the height of the walls, width and length of the bottom. A separate element is depicted the lid, as its width should exceed the dimensions of the base.
2. In addition, on the plan-scheme it is necessary to indicate what type of lid is planned to perform (hinged or removable model).
3. Do not forget to show the shape of the decorative carrier.

The best solution would be a separate picture of the accessory as a whole, and sketches of each detail.

Options for making a beautiful chest

Today there is a huge choice of plastic materials and compositions, with the help of which it is possible to create an original handicraft.

This can be salt dough, heavy paper or cardboard, sheets of plywood or solid wood.

The choice of a particular material depends on the experience of the master, his skills and abilities.

Handicraft made of wood

The most durable chests are made of wood. As a consumable material, small stumps or chunks, a bar or a board can be used. Also, chisel, sharp knife, planer, jigsaw, tools for sanding surfaces will come in handy for work.

Do not forget about antiseptic and moisture-proof impregnation solutions. Such a detail will significantly extend the life of the decorative accessory.

Instructions on how to make a carrier from wood:

1. All parts are cut from a bar or wooden board, using a jigsaw.
2. Sharp edges and cuts are processed with a file or sandpaper to remove irregularities and nicks.
3. The next step is to impregnate the surfaces with moisture-resistant oil.
4. For further assembly, you can use one of the methods of attachment: dowels, special grooves, self-tapping screws, glue. The best methods are glue and making grooves. Such techniques do not involve the use of sharp fasteners.
5. Assembly is performed sequentially: the bottom, the four walls. If glue is used in the work, it is necessary to carefully remove the excess, which can spoil the appearance.

The lid is mounted as a removable part, be sure to use the rims to fix the structure. The inner surface can be left untouched or the bottom and walls can be lined with chintz, velvet or other fabric.

A casket made of plywood

The second most popular material for creating original casket cases is plywood. In terms of strength, such a base is not inferior to solid wood, and also requires prior impregnation of parts. Instructions for the master on the work to be done:

• From a sheet of plywood, using a jigsaw, cut out parts, trim sharp edges, sand the surfaces.
• Before direct assembly, impregnation with moisture-resistant oil is performed. For plywood, this point is mandatory, since the resistance to moisture in this material is lower than that of wood.

Assembly is performed according to a similar scheme, using glue or grooves for fastening. Unlike solid wood, accessories made of plywood are always decorated with acrylic paint, PVC film with a pattern or an interesting seashell.

Handmade of paper with their own hands

To make a casket, you can use an unnecessary cardboard box or assemble a new model from heavy paper. If the first method is used, important attention is paid to the subsequent decoration. For the second variant it is necessary to prepare scissors, glue, paints for decorative painting.

A denser casket is made of cardboard:

1. A long cardboard strip, the width of which corresponds to the height of the walls of the box, is folded in an accordion with a step of 1-1,5 cm.
2. Unfold the workpiece in reverse order.
3. Twist the strip into a ring, use glue to fasten it.
4. The diameter of the future accessory cut a blank in the shape of a circle. Another piece of the same size will be needed to assemble the bottom.
5. The bottom is attached at once, and for the lid, an additional side ruffle is made. This can be a cardboard piece or a ruffle made of fabric, guipure or decorative facets.

After assembling the handicraft, you should proceed to the decorative finishing: original painting or covering the cardboard frame with textiles.

Storage accessory from threads

Another technique is often used to create original storage cases. A cardboard frame is used for this, on which knitting threads are applied. The threads can be wrapped around a cardboard base or applied over glue.

For a large piece, you can use the pom-pom technique. Pom-poms are prepared according to a single scheme of knitting yarn, and then glue brightly colored blanks around the cardboard frame.

Salted Dough Box

A very plastic, safe and cheap material is salt dough. Prepare such a base to create a casket is very simple, using only salt, flour and water.

Work with the material is better to carry out with gloves on, because the salt can have an irritating effect on the skin.

The plastic mass is prepared in a separate container, add dyes, if they are provided by the plan. Then act according to the instructions:

1. On a cutting board, a layer of dough is rolled out, the thickness of which should be at least 2 cm. For the main assembly, 5 identical blanks will be needed.
2. Assembly can be done either without a base or using any base. For example, the walls and bottom can be molded on top of a plastic cube, which is removed from the craft as the dough solidifies.
3. A separate stage is modeling the lid, and in this case the master has an opportunity to make a detail of relief with an original ornament.

The handicraft is left to dry in the open air, and then proceed to decoration (if paints and pigments were not used).

Carriers from improvised means

Many master classes are held with the use of various improvised means, for example, sticks from ice cream sticks, sleeves from toilet paper. The form of the classic box allows you to use a variety of materials for this purpose.

A box craft out of a box

The easiest way to make a beautiful box is to use an old box (from under shoes, from a dollhouse, packaging from household appliances).

The main attention in the independent work is given to decorating the craft, which uses illustrated paper, seashells, stained glass paints, broken walnut shells.

A bright chest from a postcard

If the master has accumulated a sufficient number of old greeting cards at hand, you can use them in the work.

To make a beautiful box, you need to glue or staple the cards together to form the walls, bottom and even the opening lid (this option is possible for double cards).

Accessory made from tetrapack packaging

Tetrapack technology has given craftsmen and lovers of creative activities an excellent basis for making various boxes and original accessories. Instructions for creating an interesting craft:

• From the cardboard bag it is necessary to cut off the top part.
• The inside should be carefully washed and dried.
• The outer walls of the future casket are decorated with paints or PVC film with different images.

The main attention is paid to the making of the lid. It can be a piece of cardboard, the size of which exceeds the size of the main part. On the upper contour of the lid you can make a decorative handle or attach an original decoration.

Carrier from egg trays

Another interesting blank for creating an accessory is egg trays that have an opening lid.

To work, you should carefully clean the inside of the tray, and then apply mother-of-pearl paint or any other type of decoration to the material.

In the cells you can store rings, earrings, small bracelets, personal items.

Accessories made of cardboard sleeve

Every fashionista will be happy with miniature boxes made from toilet paper sleeves:

• The outer surface of the sleeve should be decorated with a bright drawing or original stickers.
• The next step is to prepare the lid, for example, assembled from matches or made of cardboard in the form of an accordion.
• Alternatively, you can assemble a capacious box of glued together sleeves.

A box made from popsicle sticks

For independent creative work, wooden, popsicle sticks are often used. Such expendable material is safe, affordable, perfectly amenable to glue and combined with all materials.

To assemble use the technique of alternating sticks with 4 points of attachment. Such a product perfectly "breathes", and therefore is not exposed to fungal infection and the development of mold.

Creating a chest of seashells

Sea or river shells act as an excellent material for creating a personal carrier. The future handicraft acquires a unique design with a marine touch. As a sturdy base, you can use ordinary boxes or choose a particularly strong glue to assemble.

Shells are chosen approximately the same shape and size to form parallel rows (as in masonry). The only requirement for the master is to use a rigid base for the bottom of the box.

Trunk made of newspaper tubes

In interior styles such as high-tech or Loft, it is customary to use original interior items, souvenirs. Lightweight box for the mantelpiece is easy to make from newspaper tubes.

Such a detail fits perfectly into the style of a modern living room.

To work use the technique of rolling up the tubes from newspapers, which are then laid in rows and fastened with glue.

Decorating a personal carrier

The style and design of the future accessory depends on the creative skills of the master. In practice, the following techniques and technologies are used to decorate the personal chest:

• Burning and figure carving on wood.
• For less durable materials, you can use special stickers with different images.
• Having at hand a template or excellent artistic skills, craftsmen hold luxurious master classes on stained glass painting of finished products.

Shaped molding, such as with salt dough or cold china, and decorating with decorative stones and seashells are also popular.

Stylish and neat cassette will be an excellent addition to the interior of the living room or bedroom, and will take the main place on the bedside table, near the mirror in the boudoir or on the mantelpiece. To get the desired effect, you only need to have a desire, creative skills and some skill.

Photo ideas of homemade caskets